Tweet
Re: PROJECT: Pokey
This project is moving too slow
This project is moving too slow
-
Mark Harris
71 Bronco, 9 inch, 60, c4, Stak 3 speed, and 42 inch balloons. -
Re: PROJECT: Pokey
Anyone have a reamer I can buy or borrow?{o===o}Originally posted by TBS-POPSEXCUSSSSSSE ME oh RUBIMASTER!!! I forgot how Awesome YOU ARE!!! I BEG your forgivness....
Originally posted by CityHickI don't give probabilities in percentage format anymore
Comment
-
Re: PROJECT: Pokey
Marc has Aarons I believe...68 Slightly modified
67 LUBR once again
61 Willy WagonComment
-
Re: PROJECT: Pokey
You should ask 3,000 people LOL.
I have loaner one and a nice one
Mark Harris
71 Bronco, 9 inch, 60, c4, Stak 3 speed, and 42 inch balloons.Comment
-
Re: PROJECT: Pokey
Bud of mine had a slot machined into the tube, guess you could cut with cut off wheel or grinder, and welded down that slot... Makes sense! Try busting a 1" weld if penetrated pretty good into both bung and tube.
Comment
-
Re: PROJECT: Pokey
For anyone wanting the 4x4x2 box bracket.
I have printed it out on different printers to make sure it holds its measurements.{o===o}Originally posted by TBS-POPSEXCUSSSSSSE ME oh RUBIMASTER!!! I forgot how Awesome YOU ARE!!! I BEG your forgivness....Originally posted by CityHickI don't give probabilities in percentage format anymoreComment
-
Re: PROJECT: Pokey
I want royalties, biatch72' in pieces and piles of awesomenessComment
-
Re: PROJECT: Pokey
Very nice! I will be needing one of those soon. Post pics when you get it on.Originally posted by 71BRONCO71 View PostWhat can I fix next?Comment
-
Re: PROJECT: Pokey
....Some day ...I'll have power steering!...Rear-end first...Driver rear wobbling big time!...saving up for everything, so I dont have to do it twice...(locker,axles, seals, bearings, brakes,and drums)... trips to the market only for now!...bummer!..Looks like "Bronco Graveyard" had the best deal on all that stuff, Are they a Good out fit?..I like "Toms Bronco", but some stuff is more expensive then other things the other guys have?(O===O) "Rick" (O===O)Comment
-
Re: PROJECT: Pokey
I've steered away from Bronco Graveyard over the years. I stick predominantly with Wild Horses and Tom's. Their customer service is head and shoulders over Graveyard and well worth the extra few bucks in my opinion. For common stuff like brake parts, etc you might want to check with your local parts house as well. They should have, or atleast be able to get all that stuff for you too. Nice thing about the Bronco houses though is you'll most likely get the right parts the FIRST time w/o the guess work at some of the chain stores...sigpicRoad trips on an island get boring after the 1st lap...
Comment
-
Re: PROJECT: Pokey
TRO, 1.5 tube, 4x4x2 box, new ball joints, 13" Big Black Cock Shocks,Ditched the trac bar drop braket for a riser, F250 towers and some Orange KnucklesAttached FilesLast edited by 71BRONCO71; 06-12-2011, 03:40 PM.{o===o}Originally posted by TBS-POPSEXCUSSSSSSE ME oh RUBIMASTER!!! I forgot how Awesome YOU ARE!!! I BEG your forgivness....Originally posted by CityHickI don't give probabilities in percentage format anymoreComment
-
-
Re: PROJECT: Pokey
Good job! Just did my steering and it is so nice.
Jack73 Bronco 302 C4 3 1/2 2" 5.14 9"/d44 d20 37"Comment
-
Re: PROJECT: Pokey
Turned out nice! What was your source for the knuckles? I might investigate getting a set of those as well. Never heard of BBCS. You'll have to give me the scoop on'em in a couple weeks.sigpicRoad trips on an island get boring after the 1st lap...Comment
-
Re: PROJECT: Pokey
He just painted his knuckles orange to be cool.. hahah!Comment
-
Re: PROJECT: Pokey
LOL! After closer inspection I guess they aren't Dedenbears. Looks like the tie rod mounts higher than my TRO but maybe not... Good "knock offs"!Originally posted by PhantomEB View Post
sigpicRoad trips on an island get boring after the 1st lap...Comment
Comment