Announcement

Collapse
No announcement yet.

Engine help (electrical)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Engine help (electrical)

    SO i have been trying to fire the motor up and all that happens is the soliniod just clicks. i have a brand new gear reduction starter from toms. ground wire from the batt to the motor (even one from the motor to the frame). battery has a charge on it and the only wires i disconnected was the oil pressure sending unit, water temp, and the one red wire that goes to the + coil. i ave been trying to fire this 8!TCH up and am 150% lost. does anyone know what i could be doing wrong.

    Lets see if everything is right.

    looking at the solinoid from left to right
    The + battery is connected to the left side of the soinoid
    red/blue wire on the left side of solinoid
    brown wire is on the right side of the solinoid
    starter wire on the other end of the solinoid
    starter is in the bellhousing.

    I have even hooked up the old starter to see if that was the problem.

    I HATE electrical stuff hahahahaha

    Last edited by 71BRONCO71; 06-21-2007, 04:47 PM.
    {o===o}
    Originally posted by TBS-POPS
    EXCUSSSSSSE ME oh RUBIMASTER!!! I forgot how Awesome YOU ARE!!! I BEG your forgivness....
    Originally posted by CityHick
    I don't give probabilities in percentage format anymore

  • #2
    If the starter is the same one I got form bronco graveyard it has an internal solenoid and you need to run a jumper frm the spade terminal to the other bat. lead on the starter.
    71, 302, 435, 20, spool rear, ARB front, 35's,3.5sl 2"bl
    nodular 3rd 1350 yoke disks allaround and on the road again

    Comment


    • #3
      this is the one
      Attached Files
      Last edited by 71BRONCO71; 06-21-2007, 05:00 PM.
      {o===o}
      Originally posted by TBS-POPS
      EXCUSSSSSSE ME oh RUBIMASTER!!! I forgot how Awesome YOU ARE!!! I BEG your forgivness....
      Originally posted by CityHick
      I don't give probabilities in percentage format anymore

      Comment


      • #4
        lets work this out, call me pops, jeff 209-649-4249
        72 sport/exp.,TBI 302,NP435,4.56 Powrlok/ARB in Full Width's.5.5" CAGE lift w/arms,2'' bl,37's, rescued from the concrete jungle (L.A.) NEVER DONE!!! Sold to buy a Boat, Now Broncoless.....Now it's fast water,smooth women and cold beer!! toad jeep owner now,,,,,, sorry

        ALL MY DRINKING BUDDIES HAVE A SEVERE BRONCO PROBLEM !!!


        Originally posted by 71BRONCO71
        BULLSHIT! I love your meat in my mouth
        RIP MARK BECK RIP MY FRIEND! RIP GIZMO,My little Buddy.

        Comment


        • #5
          - i think i got him fixed!!!
          Last edited by TBS-POPS; 06-21-2007, 05:23 PM.
          72 sport/exp.,TBI 302,NP435,4.56 Powrlok/ARB in Full Width's.5.5" CAGE lift w/arms,2'' bl,37's, rescued from the concrete jungle (L.A.) NEVER DONE!!! Sold to buy a Boat, Now Broncoless.....Now it's fast water,smooth women and cold beer!! toad jeep owner now,,,,,, sorry

          ALL MY DRINKING BUDDIES HAVE A SEVERE BRONCO PROBLEM !!!


          Originally posted by 71BRONCO71
          BULLSHIT! I love your meat in my mouth
          RIP MARK BECK RIP MY FRIEND! RIP GIZMO,My little Buddy.

          Comment


          • #6
            Right???

            off to the store for a longer batt cable
            Attached Files
            Last edited by 71BRONCO71; 06-21-2007, 05:26 PM.
            {o===o}
            Originally posted by TBS-POPS
            EXCUSSSSSSE ME oh RUBIMASTER!!! I forgot how Awesome YOU ARE!!! I BEG your forgivness....
            Originally posted by CityHick
            I don't give probabilities in percentage format anymore

            Comment


            • #7
              yes, correct..get rid of solinoid on fender and run wires to starter...
              72 sport/exp.,TBI 302,NP435,4.56 Powrlok/ARB in Full Width's.5.5" CAGE lift w/arms,2'' bl,37's, rescued from the concrete jungle (L.A.) NEVER DONE!!! Sold to buy a Boat, Now Broncoless.....Now it's fast water,smooth women and cold beer!! toad jeep owner now,,,,,, sorry

              ALL MY DRINKING BUDDIES HAVE A SEVERE BRONCO PROBLEM !!!


              Originally posted by 71BRONCO71
              BULLSHIT! I love your meat in my mouth
              RIP MARK BECK RIP MY FRIEND! RIP GIZMO,My little Buddy.

              Comment


              • #8
                Originally posted by TBS-POPS
                yes, correct..get rid of solinoid on fender and run wires to starter...

                Just jumper the solenoid on the starter. No need to run any new wires.
                71, 302, 435, 20, spool rear, ARB front, 35's,3.5sl 2"bl
                nodular 3rd 1350 yoke disks allaround and on the road again

                Comment


                • #9
                  true, better to get rid of the stuff on the fender to get rid of further confusion!!!!
                  72 sport/exp.,TBI 302,NP435,4.56 Powrlok/ARB in Full Width's.5.5" CAGE lift w/arms,2'' bl,37's, rescued from the concrete jungle (L.A.) NEVER DONE!!! Sold to buy a Boat, Now Broncoless.....Now it's fast water,smooth women and cold beer!! toad jeep owner now,,,,,, sorry

                  ALL MY DRINKING BUDDIES HAVE A SEVERE BRONCO PROBLEM !!!


                  Originally posted by 71BRONCO71
                  BULLSHIT! I love your meat in my mouth
                  RIP MARK BECK RIP MY FRIEND! RIP GIZMO,My little Buddy.

                  Comment


                  • #10
                    Originally posted by TBS-POPS
                    true, better to get rid of the stuff on the fender to get rid of further confusion!!!!

                    I always have wire, so the one on the starter's my spare.

                    I've been thru a few solenoids. 3:50's don't like to starter crawl even with the 435
                    71, 302, 435, 20, spool rear, ARB front, 35's,3.5sl 2"bl
                    nodular 3rd 1350 yoke disks allaround and on the road again

                    Comment


                    • #11
                      POPS (RED GUY) ME (The purple guys)
                      {o===o}
                      Originally posted by TBS-POPS
                      EXCUSSSSSSE ME oh RUBIMASTER!!! I forgot how Awesome YOU ARE!!! I BEG your forgivness....
                      Originally posted by CityHick
                      I don't give probabilities in percentage format anymore

                      Comment


                      • #12
                        No kneeling necessary,just throw money!!!!!you go 71,have fun!!!

                        pops
                        72 sport/exp.,TBI 302,NP435,4.56 Powrlok/ARB in Full Width's.5.5" CAGE lift w/arms,2'' bl,37's, rescued from the concrete jungle (L.A.) NEVER DONE!!! Sold to buy a Boat, Now Broncoless.....Now it's fast water,smooth women and cold beer!! toad jeep owner now,,,,,, sorry

                        ALL MY DRINKING BUDDIES HAVE A SEVERE BRONCO PROBLEM !!!


                        Originally posted by 71BRONCO71
                        BULLSHIT! I love your meat in my mouth
                        RIP MARK BECK RIP MY FRIEND! RIP GIZMO,My little Buddy.

                        Comment


                        • #13
                          So did you go through the cam break-in procedure?? Hows she sound? One more running Bronco in the group!

                          Have fun!
                          1970 Bronco
                          My build thread

                          Comment


                          • #14
                            cam break in
                            {o===o}
                            Originally posted by TBS-POPS
                            EXCUSSSSSSE ME oh RUBIMASTER!!! I forgot how Awesome YOU ARE!!! I BEG your forgivness....
                            Originally posted by CityHick
                            I don't give probabilities in percentage format anymore

                            Comment

                            Working...
                            X