Page 1 of 3 123 LastLast
Results 1 to 15 of 36

Thread: Partial Liquidation

  1. #1

    Default Partial Liquidation

    After many years of collecting parts for all the projects I "thought" I would have time to build reality is there is no time so I will be listing my "stuff for sale" starting today. I'm asking what I feel is a fair price but if I'm off on something let me know and I will make an adjustment.

    1- AOD tranny from a 89 mustang $175
    2- Auto steering columns (stock) $100 each
    5- Lower steering shafts with lower joint (stock) $25 each
    7- Electric wiper assembly's (stock style)$75 each
    1- Pair of Hanson rocker guards- new and uncapped $175 SOLD
    1- Modified 1/2 cab top with sunroof $400
    1- NP435 & adapter rebuilt with one season of use $500
    1- Small block C-6 with custom adapter for bronco ran when removed $400
    1- Bronco C-4 unknown condition $250
    1- Manual steering box $40
    3- 4 turn power steering box (stock) $325
    4- 6 turn power steering box (stock) $325
    1- Complete power steering set up with 4 turn box (stock) $500
    1- Power steering pump & pump bracket (stock) $30
    1- 3 speed trans and transfer case $150
    2- BC Bronco's 300M D-20 output shafts (NIB) $350 each (1 SOLD 1 PENDING)
    1- D-44 electrac complete- very little use $400 (SOLD)
    2- Stock hoods near excellent condition $275 each
    Various stock 28 spline axles- Free (will bring to BBQ for POPX)

    I will be at the BBQ this Saturday so I can deliver parts if needed. Thanks for looking.

    Ken
    Last edited by BRONKEN; 03-28-2010 at 06:55 PM.
    69, 7" lift,D-44 with air locker, 9" 35 spl full floater with a locker, 4-wheel disc, custom paint, one off custom mods, Hanson bumpers and side protection, 35's on Champion beadlocks.

  2. #2
    Join Date
    Feb 2005
    Location
    Sacramento CA
    Posts
    4,283

    Default Re: Partial Liquidation

    Damn your did hoard some parts! Godd for you
    69/5.0/ZF/4.56/37" beadlocked/ARB's/O'Brians For Sale
    68 Slightly modified
    67 5.0 Lubr

  3. #3

    Default Re: Partial Liquidation

    and this is just a start
    69, 7" lift,D-44 with air locker, 9" 35 spl full floater with a locker, 4-wheel disc, custom paint, one off custom mods, Hanson bumpers and side protection, 35's on Champion beadlocks.

  4. #4

    Default Re: Partial Liquidation

    Pm sent

  5. #5
    Join Date
    Feb 2007
    Location
    Valley Springs, Ca.
    Posts
    5,102

    Default Re: Partial Liquidation

    I think a 300m shaft should get donated to POPX till it finds a home!!!
    72 sport/exp.,TBI 302,NP435,4.56 Powrlok/ARB in Full Width's.5.5" CAGE lift w/arms,2'' bl,37's, rescued from the concrete jungle (L.A.) NEVER DONE!!! Sold to buy a Boat, Now Broncoless.....Ah wait, 79 in the boneyard, does that count??
    Now it's fast water,smooth women and cold beer!!

    ALL MY DRINKING BUDDIES HAVE A SEVERE BRONCO PROBLEM !!!


    Quote Originally Posted by 71BRONCO71 View Post
    BULLSHIT! I love your meat in my mouth
    RIP MARK BECK RIP MY FRIEND! RIP GIZMO,My little Buddy.

  6. #6

    Default Re: Partial Liquidation

    Quote Originally Posted by TBS-POPS View Post
    I think a 300m shaft should get donated to POPX till it finds a home!!!
    69, 7" lift,D-44 with air locker, 9" 35 spl full floater with a locker, 4-wheel disc, custom paint, one off custom mods, Hanson bumpers and side protection, 35's on Champion beadlocks.

  7. #7
    Join Date
    Dec 2006
    Location
    Almost San Martin, Ca
    Posts
    3,578

    Default Re: Partial Liquidation

    Quote Originally Posted by BRONKEN View Post
    I will be at the BBQ this Saturday so I can deliver parts if needed. Thanks for looking.

    Ken
    Are we driving Broncos to the bash?
    1968 Plain Jane Lubr, Explorer EDIS EFI, 4R70W, a daily driver!
    2009 Grabber Orange Mustang GT for fun!
    1971 Project Bronco.....

  8. #8

    Default Re: Partial Liquidation

    It looks like the whole family wants to go this time so I will most likely tow. What time are you leaving? R u at work?
    69, 7" lift,D-44 with air locker, 9" 35 spl full floater with a locker, 4-wheel disc, custom paint, one off custom mods, Hanson bumpers and side protection, 35's on Champion beadlocks.

  9. #9
    Join Date
    Mar 2007
    Location
    Roseville
    Posts
    1,017

    Default Re: Partial Liquidation

    Hey POPS, If you happen to find a 300M output shaft laying around in the pile let me know, I could use one!

    Seriously though... I may be interested in one if I sell some stuff to offset some cost.

    Heck, this whole bbq swap meet may just turn into a barter and trade, no cash required! Except for lunch of course.
    1969 EB, 88 Speed density EFI 302, HP D44 front w/ARB, Radius arm long arm, NP435, D20, D60 w/power lock rear, 4link rear with 4" stretch, Front and rear bumpers made by me.

  10. #10

    Default Re: Partial Liquidation

    If someone has a set of 17X9 5on5.5 rims, I would be interested.
    69, 7" lift,D-44 with air locker, 9" 35 spl full floater with a locker, 4-wheel disc, custom paint, one off custom mods, Hanson bumpers and side protection, 35's on Champion beadlocks.

  11. #11

    Default Re: Partial Liquidation

    I'll buy one of those 300m out put shafts.

    Greg
    70w/ 69/351w/GT40 lightning heads 435/203/D20 5.5/3in 44/arb 9in/detroit need some beadlocks

  12. #12
    Join Date
    Feb 2005
    Location
    Calgary CANADA.
    Posts
    2,467

    Default Re: Partial Liquidation

    Question about the 300M shafts, are they necessary for both or just front or just rear?

  13. #13

    Default Re: Partial Liquidation

    Most only upgrade the rear. I'm not sure they offer a upgrade for the front of the D-20.
    69, 7" lift,D-44 with air locker, 9" 35 spl full floater with a locker, 4-wheel disc, custom paint, one off custom mods, Hanson bumpers and side protection, 35's on Champion beadlocks.

  14. #14
    Join Date
    Feb 2005
    Location
    Calgary CANADA.
    Posts
    2,467

    Default Re: Partial Liquidation

    I am interested in one, have to wait til Friday. Willin to ship USPS Priority post to Canada?

  15. #15

    Default Re: Partial Liquidation

    Quote Originally Posted by PhantomEB View Post
    I am interested in one, have to wait til Friday. Willin to ship USPS Priority post to Canada?
    Sure, as long as you are paying shipping. I have never shipped an item out of the U.S. is there any special requirements?

    Ken
    69, 7" lift,D-44 with air locker, 9" 35 spl full floater with a locker, 4-wheel disc, custom paint, one off custom mods, Hanson bumpers and side protection, 35's on Champion beadlocks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •